The Health and Safety Executive was formed on January 1st 1975, with the objective of enforcing health and safety legislation in workplaces, with the exception of those which were regulated by local authorities. Over the course of the following years the HSE has provided many guidelines to carrying out work in a safe manner, one of which is HSG47 which is aimed specifically at those engaged in any sort of work which involves breaking the ground.
There can be many dangers when carrying out any kind of excavation work, since virtually all of our utilities, with the exception of some telephone services which still use telegraph poles, run underground. That means that although we may be aware that they exist, we don’t know exactly where they run, how deep down they are, and what services there may be in a given spot.
In turn, that means that, since we cannot see them, we need to use certain tools in order to determine (a) if there is anything where we need to dig, (b) if so, what utilities they are, and (c) ideally how deep down they are. Let’s face it, a utility may be a couple of feet below the surface or it could be many feet down if, for instance, it runs into a building which has a basement.
The two main tools that are used to locate and identify buried services are the CAT (Cable Avoidance Tool) and Genny (Signal Generator). Used on its’ own, the CAT can only locate metal services which give off a signal. So, for example, if there is an electric cable providing street lighting, the CAT can only locate it when the lights are on and there is electricity running through it. So you won’t be able to locate it during daylight hours. This is why it is essential to use the CAT in combination with the Genny.
At Sygma Solutions we provide a CAT course and HSG47 training so that operatives can learn how to use the tools. Our CAT course goes into great detail as to how to use the CAT and Genny in all their modes, using both training in the classroom and following this up with practical work on site so that operatives are able to pass the exam requirements.
The HSG47 training also covers the fact that, while the CAT and Genny are incredible tools, they nonetheless have certain limitations, so it is vital to understand what these are and how to allow for them.
If the course you are looking for has no dates or you would like a course built for your company please contact
enquiries@sygma-solutions.com for current availability and booking form
Open Days
Please contact us about open days
PAS128 Utility Mapping Training Modules mapped to CICES competencies
– 2 days
Module 1 – Pas 128 Level D &C training to include level 3 assessment – CICES GEUS01 A-D
– 3 Days
Module 2 – PAS128 Level B Training – can include Level 4 assessment – CICES GUES01 E-I
Please contact enquires@sygma-solutions.com for future dates and a booking form
2 Day Advanced EM Course (RD8100/8200 & VIVAX)
In depth course covering electromagnetic locators, theory and intensive practical on our real world training site.
Cost: £295 per person
Location: Sygma Solutions training centre, Wigan
Please contact us for future dates and a booking form
1 Day Mala GPR Module 1 – Theory & Practical
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Mala GPR Module 2 – Post processing
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
2 Day GPR – All Manufacturers
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
5 Day TSA & ICES Approved 5 Day Utility Mapping Course
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Location: Worcester
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Public Genny & CAT Course
Cost: £175 plus VAT
Location: Sygma Solutions training centre, Wigan
Dates:
Please contact us for future dates and a booking form
Level 3 Utility Mapping Qualification – All Online
Cost: £275 PLUS REG FEE
Location: Online
Dates: To suit
Level 5 Diploma Utility Mapping Qualification – Online Workbooks – followed by assessment
Cost £1100 PLUS REG FEE
Location: Sygma Solutions training centre or your site
Dates: To suit
Open level 5 assessment dates at Sygma Solutions, Wigan
Level 5 Diploma Utility Mapping Qualification – in 5 days
Cost – contact us
Location: Sygma Solutions training centre, Wigan
2nd – 6th June 2025 Limited Availability
28th July – 1st August 2025 Limited Availability
Sygma PAS 128 Utility Surveyor Training Including Proqual Level 3 Utility Mapping and Surveying
Please contact us for future dates and a booking form
Location: Sygma Solutions training centre, Wigan
28th April – 2nd May 2025 Limited Availability
12th – 16th May 2025 Limited Availability
14th – 18th July 2025 Limited Availability
11th – 15th August 2025
8th – 12th September 2025
29th September – 3rd October 2025
27th – 31st October 2025
24th – 28th November 2025
8th – 12th December 2025
Level 3 Utility Mapping and Surveying Public Course
Location: Sygma Solutions training centre, Wigan
28th – 29th April 2025 Limited Availability
12th – 13th May 2025 Limited Availability
14th – 15th July 2025 Limited Availability
11th – 12th August 2025
8th – 9th September 2025
29th – 20th September 2025
27th – 28th October 2025
24th – 25th November 2025
8th – 9th December 2025
GPS Course & Total Station Introduction
This is a 2 day dedicated GPS course with an introduction to Total Station
Please contact us for future dates and a booking form
Please contact enquires@sygma-solutions.com for future dates and a booking form
Please contact:
enquiries@sygma-solutions.com for current availability and booking form for any course