In Great Britain, there are approximately four million excavation projects taking place every year – 77,000 every week. During the course of these, on average there are 60,000 cases each year of a contractor striking a utility of one sort or another, often causing serious injury to the worker. Some utilities such as telecoms, for example, are not so likely to cause injury, but striking an electricity cable or gas pipe is quite the opposite. There are a dozen or so fatalities each year.
Undertaking any sort of groundwork comes with a set of risks, and those risks can vary according to where you are and how deep you need to dig. If you are out in the country in the middle of a field, the amount of risk is relatively low. One might think there is no risk, but there is always the possibility, however remote, that you could strike an underground cable of one sort or another. Why? Quite simply because a utility may have found that the shortest route from point A to point B is across the said field and that they have installed their cable, or whatever, there for that reason.
If you’re reading this blog you probably already have a sense of how important accurate mapping of underground pipes and cables is. As well as the sheer danger to life, damage caused by undertaking excavations where cables are not sufficiently detected can lead to serious project delays and loss of huge sums of money as construction is stalled.
As new technologies have emerged and systems have advanced, the tools we use have also evolved and can offer operatives a range of useful features and solutions such as more accurate depth measurement.
Today, many professionals in the cable avoidance sector use the RD8100 to protect utilities from damage and make excavations easier and safer.
If the course you are looking for has no dates or you would like a course built for your company please contact
enquiries@sygma-solutions.com for current availability and booking form
Open Days
Please contact us about open days
PAS128 Utility Mapping Training Modules mapped to CICES competencies
– 2 days
Module 1 – Pas 128 Level D &C training to include level 3 assessment – CICES GEUS01 A-D
– 3 Days
Module 2 – PAS128 Level B Training – can include Level 4 assessment – CICES GUES01 E-I
Please contact enquires@sygma-solutions.com for future dates and a booking form
2 Day Advanced EM Course (RD8100/8200 & VIVAX)
In depth course covering electromagnetic locators, theory and intensive practical on our real world training site.
Cost: £295 per person
Location: Sygma Solutions training centre, Wigan
30th – 31st May 2024
23rd – 24th July 2024
5th – 6th September 2024
Location: Sygma Solutions training centre, Wigan
Please contact us for future dates and a booking form
1 Day Mala GPR Module 1 – Theory & Practical
Cost: FOC
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Mala GPR Module 2 – Post processing
Cost: FOC
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
2 Day GPR – All Manufacturers
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
5 Day TSA & ICES Approved 5 Day Utility Mapping Course
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Location: Worcester
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Public Genny & CAT Course – Can include ProQual Level 2 Qualification as an option
Cost: £175 plus VAT
Location: Sygma Solutions training centre, Wigan
Dates:
Please contact us for future dates and a booking form
Level 3 Utility Mapping Qualification – All Online
Cost: £275 PLUS REG FEE
Location: Online
Dates: To suit
Level 5 Diploma Utility Mapping Qualification – Online Workbooks – followed by assessment
Cost £1100 PLUS REG FEE
Location: Sygma Solutions training centre or your site
Dates: To suit
Open level 5 assessment dates at Sygma Solutions, Wigan
Level 5 Diploma Utility Mapping Qualification – in 5 days
Cost – contact us
Location: Sygma Solutions training centre, Wigan
Dates:
3rd – 7th June 2024
1st – 5th July 2024
Sygma PAS 128 Utility Surveyor Training Including Proqual Level 3 Utility Mapping and Surveying
Please contact us for future dates and a booking form
Location: Sygma Solutions training centre, Wigan
15th – 19th April 2024 Limited spaces available
20th – 24th May 2024
10th – 14th June 2024
8th – 12th July 2024
Level 3 Utility Mapping and Surveying Public Course
24th – 25th June 2024
1st – 2nd July 2024
24th – 25th September 2024
Location: Sygma Solutions training centre, Wigan
GPS Course & Total Station Introduction
This is a 2 day dedicated GPS course with an introduction to Total Station
Please contact us for future dates and a booking form
Please contact enquires@sygma-solutions.com for future dates and a booking form
Please contact:
enquiries@sygma-solutions.com for current availability and booking form