Cable strikes are unfortunately a common occurrence. Of the millions of excavations that take place each year, tens of thousands of cable strikes occur, leading to various injuries, damage to equipment and property, and in the worst cases, fatalities.
When undertaking any sort of work that involves digging in the ground, it is vital to take every step to find out if there are any underground services running in the area in which a contractor is about to excavate or even close by.
While slips and falls are the most common causes of accidents and injuries during the course of the working day, there are several others which can also cause injury and even fatalities. Many of these are concerned with groundwork. When digging or excavating anywhere in the UK, there is always not just the possibility, but the probability, that there are underground services in the area concerned.
Cities and towns are growing at a rapid pace, relying on complex and intricate utility networks to keep our vital services running smoothly. However, some areas will find it harder than others to accommodate new infrastructure beneath the ground.
Carrying out any sort of excavation work requires a considerable amount of planning and forethought before even putting a spade into the ground. Strictly speaking, you should probably consider learning where the electricity cables, water pipes, and sewage pipes run into and out of your home through the front garden, but it is not likely that you will hit anything if you are just planting a few shrubs. However, if you are going to have an extension built, then you need to know where everything is before digging out foundations. Not only is a cable strike dangerous, but it can also finish up costing a lot of money.
Cable strikes are amongst the most significant health and safety risks for engineers in the utility sector. An estimated 60,000 underground cable strikes occur every year, and many of these lead to severe injury or death, as well as costing businesses millions in associated damages and compensations. Sygma Solution works with Utility Engineers to avoid these situations.
If the course you are looking for has no dates or you would like a course built for your company please contact
enquiries@sygma-solutions.com for current availability and booking form
Open Days
Please contact us about open days
PAS128 Utility Mapping Training Modules mapped to CICES competencies
– 2 days
Module 1 – Pas 128 Level D &C training to include level 3 assessment – CICES GEUS01 A-D
– 3 Days
Module 2 – PAS128 Level B Training – can include Level 4 assessment – CICES GUES01 E-I
Please contact enquires@sygma-solutions.com for future dates and a booking form
2 Day Advanced EM Course (RD8100/8200 & VIVAX)
In depth course covering electromagnetic locators, theory and intensive practical on our real world training site.
Cost: £295 per person
Location: Sygma Solutions training centre, Wigan
30th – 31st May 2024
23rd – 24th July 2024
5th – 6th September 2024
Location: Sygma Solutions training centre, Wigan
Please contact us for future dates and a booking form
1 Day Mala GPR Module 1 – Theory & Practical
Cost: FOC
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Mala GPR Module 2 – Post processing
Cost: FOC
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
2 Day GPR – All Manufacturers
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
5 Day TSA & ICES Approved 5 Day Utility Mapping Course
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Location: Worcester
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Public Genny & CAT Course – Can include ProQual Level 2 Qualification as an option
Cost: £175 plus VAT
Location: Sygma Solutions training centre, Wigan
Dates:
Please contact us for future dates and a booking form
Level 3 Utility Mapping Qualification – All Online
Cost: £275 PLUS REG FEE
Location: Online
Dates: To suit
Level 5 Diploma Utility Mapping Qualification – Online Workbooks – followed by assessment
Cost £1100 PLUS REG FEE
Location: Sygma Solutions training centre or your site
Dates: To suit
Open level 5 assessment dates at Sygma Solutions, Wigan
Level 5 Diploma Utility Mapping Qualification – in 5 days
Cost – contact us
Location: Sygma Solutions training centre, Wigan
Dates:
3rd – 7th June 2024
1st – 5th July 2024
Sygma PAS 128 Utility Surveyor Training Including Proqual Level 3 Utility Mapping and Surveying
Please contact us for future dates and a booking form
Location: Sygma Solutions training centre, Wigan
15th – 19th April 2024 Limited spaces available
20th – 24th May 2024
10th – 14th June 2024
8th – 12th July 2024
Level 3 Utility Mapping and Surveying Public Course
24th – 25th June 2024
1st – 2nd July 2024
24th – 25th September 2024
Location: Sygma Solutions training centre, Wigan
GPS Course & Total Station Introduction
This is a 2 day dedicated GPS course with an introduction to Total Station
Please contact us for future dates and a booking form
Please contact enquires@sygma-solutions.com for future dates and a booking form
Please contact:
enquiries@sygma-solutions.com for current availability and booking form