It is fair to say that, in the UK, most of the services that we need run underground in cables, pipes, and trenches. If they didn’t the landscape would be littered with ever more pylons and cables and pipes on the surface, so it is accepted that as far as possible they should be underground.
Underground, of course means out of sight, which is why we put them there in the first place. It also means that they cannot get damaged by vehicles running over them, storms, floods, and more.
All of which is, to use the old phrase, fine and dandy. Until it comes to the point when you need to repair or replace them, run pipework or cables along existing tracks, or something blows up and needs urgent attention.
Most people never think about any of this, of course, because as long as they switch the light on, and it comes on, that is all that they are interested in. Fair enough.
However, if you are an operative working for any of the utility companies who has the perhaps unenviable job of digging down, finding the right cable or pipe, and then repairing or replacing it, then it becomes a serious problem. Not to put too fine a point on it, how do you find the cable or pipe that you need? How do you know exactly where it runs? The short answer is that you don’t, unless you happen to have accurate plans of where the service is laid.
Equally, how do you know that you are not going to hit and damage something else? You don’t. You may obtain plans from the other service providers in the area, but how do you know that they are accurate? You don’t.
The only answer is to carry out a thorough survey of the area before you even think about starting to dig. Fortunately, we have some very advanced tools that enable one to do this, in the form of the CAT and the Genny – abbreviations for Cable Avoidance Tool and Signal Generator.
Even then they have certain limitations, so you cannot just pop down to the shop and buy them. You need thorough CAT training in the use of them.
At Syma Solutions, we have over 100 years of combined experience in the use of these tools which is why we provide CAT training courses that teach operatives how to use them in all different circumstances, and – most importantly – the limitations that they have. If you don’t fully understand these, you could make a very unfortunate mistake.
If the course you are looking for has no dates or you would like a course built for your company please contact
enquiries@sygma-solutions.com for current availability and booking form
Open Days
Please contact us about open days
PAS128 Utility Mapping Training Modules mapped to CICES competencies
– 2 days
Module 1 – Pas 128 Level D &C training to include level 3 assessment – CICES GEUS01 A-D
– 3 Days
Module 2 – PAS128 Level B Training – can include Level 4 assessment – CICES GUES01 E-I
Please contact enquires@sygma-solutions.com for future dates and a booking form
2 Day Advanced EM Course (RD8100/8200 & VIVAX)
In depth course covering electromagnetic locators, theory and intensive practical on our real world training site.
Cost: £295 per person
Location: Sygma Solutions training centre, Wigan
Please contact us for future dates and a booking form
1 Day Mala GPR Module 1 – Theory & Practical
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Mala GPR Module 2 – Post processing
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
2 Day GPR – All Manufacturers
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
5 Day TSA & ICES Approved 5 Day Utility Mapping Course
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Location: Worcester
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Public Genny & CAT Course
Cost: £175 plus VAT
Location: Sygma Solutions training centre, Wigan
Dates:
Please contact us for future dates and a booking form
Level 3 Utility Mapping Qualification – All Online
Cost: £275 PLUS REG FEE
Location: Online
Dates: To suit
Level 5 Diploma Utility Mapping Qualification – Online Workbooks – followed by assessment
Cost £1100 PLUS REG FEE
Location: Sygma Solutions training centre or your site
Dates: To suit
Open level 5 assessment dates at Sygma Solutions, Wigan
Level 5 Diploma Utility Mapping Qualification – in 5 days
Cost – contact us
Location: Sygma Solutions training centre, Wigan
2nd – 6th June 2025 Limited Availability
28th July – 1st August 2025 Limited Availability
Sygma PAS 128 Utility Surveyor Training Including Proqual Level 3 Utility Mapping and Surveying
Please contact us for future dates and a booking form
Location: Sygma Solutions training centre, Wigan
28th April – 2nd May 2025 Limited Availability
12th – 16th May 2025 Limited Availability
14th – 18th July 2025 Limited Availability
11th – 15th August 2025
8th – 12th September 2025
29th September – 3rd October 2025
27th – 31st October 2025
24th – 28th November 2025
8th – 12th December 2025
Level 3 Utility Mapping and Surveying Public Course
Location: Sygma Solutions training centre, Wigan
28th – 29th April 2025 Limited Availability
12th – 13th May 2025 Limited Availability
14th – 15th July 2025 Limited Availability
11th – 12th August 2025
8th – 9th September 2025
29th – 20th September 2025
27th – 28th October 2025
24th – 25th November 2025
8th – 9th December 2025
GPS Course & Total Station Introduction
This is a 2 day dedicated GPS course with an introduction to Total Station
Please contact us for future dates and a booking form
Please contact enquires@sygma-solutions.com for future dates and a booking form
Please contact:
enquiries@sygma-solutions.com for current availability and booking form for any course